rotax brp

 

Builder Series

Rotax Builder Series - 912iS CH 750 #1

Rotax OwnerThe first video in a new Builder Series format.
This first installment from a series of videos that follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
Video Length: 2:24

Rotax Builder Series - 912iS CH 750 #2

Rotax OwnerThis second installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
Among the items discussed in this video is the design of the fuel system.  Skytek has come up with a design to meet fuel flow and safety requirements in all flight conditions.
Video Length: 6:19

Rotax Builder Series - 912iS CH750 #3

Rotax OwnerThis third installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
In this video, we look at Skytek's testing and qualification of their fuel system design.
Video Length: 10:58

Rotax Builder Series - 912iS CH750 #4

Rotax OwnerThis fourth installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
In this video, we look at the engine and instrumentation installation and first engine test runs.
Video Length: 3:18

Rotax Builder Series - 912iS CH750 #5

Rotax OwnerThe fifth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and examines some of the cowling design changes made to satisfy the cooling requirements of the 912iS engine.
Video Length: 9:17  

Rotax Builder Series - 912iS CH750 #6

Rotax OwnerThe sixth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains some of the important fuel system design considerations that were required for the 912iS engine.
Video Length: 10:59  

Rotax Builder Series - 912iS CH750 #7

Rotax OwnerThe seventh installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains how fuel quality and fuel system design go hand in hand.
Video Length: 13:08  

Rotax Builder Series - 912iS CH750 #8

Rotax OwnerThe eighth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains the design considerations of the header tank system.
Video Length: 14:42  

Rotax Builder Series - 912iS CH750 #9

Rotax OwnerThe ninth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains some of the differences between the 912iS and the 912ULS - and the  design considerations required for cooling the engine.
Video Length: 13:37  

Rotax Builder Series - 912iS CH750 #10

Rotax OwnerThe tenth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and demonstrates the simplicity and elegant ergonomics of the panel systems.
Video Length: 9:23