fbpx

 

  • Re: Savvy Analysis for a Rotax?

    by » 2 years ago


    James, do you just use their free service? 


  • Re: Savvy Analysis for a Rotax?

    by » 2 years ago


    Yes, I only use the free service.

    I have Dynon Skyview displays and Dynon engine monitoring, so at the end of each flight I download the engine data for that flight onto a USB and then go home and upload that data into my Savvy account.

    The engine data saved by the Dynon system includes: EGT, CHT (coolant temp), Oil temp, Oil pressure, RPM, Lane voltage, system volts, Fuel flow, Fuel pressure, Manifold pressure, Engine status, Engine time, and Throttle position.  I may have left out something, but you get the idea.  If your engine monitor is supported by Savvy you get lots of info.

    What it does not track is fuel injector data or engine timing.  That info must be obtained using the dongle and BUDS.

    In addition, Savvy tracks all airframe and flight data- position, airspeeds (indicated and TAS), altitudes (GPS and pressure), auto pilot activity in pitch and roll axis (but not yaw damper), G forces,  course deviation, AOA, etc..  There are far more data but you get the idea.  This is a function of the Dynon system than the data from the engine computers.

    James Porter

     


You do not have permissions to reply to this topic.