This Video reviews the Service Instruction SI-912-037_914-042_912 i-034 - Installation of a propeller by usage of round-neck nut set for ROTAX® 912, 914, and 912 i (Series) Aircraft Engines
Video Length: 4:24
This video discusses the two different versions of the Rotax 900 series engines and specifies which propeller should be used with each version.
Video Length: 5:25
This Video reviews the “PAC” Service Instruction Document SI-PAC-028 Optional Cooling Air Baffle for ROTAX® Aircraft Engines.
Video Length: 7:12
This Video reviews the Service Letter SL-2ST-016R1 /SL-912-026R1 /SL-914-024R1 SL-912 i-018R1 /SL-915 i-013R1/SL-916 i-013 Information on maintenance and spare parts planning for ROTAX® Aircraft Engines.
Video Length: 4:37
This Video reviews the Service Instruction SI-912 i-029 / SI-915 i-012 / SI-916 i-007 Introduction of new double ignition coils and new wiring harnesses for ROTAX® Engine Type 912 i (Series), 915 i (Series) and 916 i (Series).
Video Length: 6:46
This Video reviews the Service Instruction SI-916 i-005R1 / SI-915 i-010R1 / SI-912 i-026R1 / SI-912-033R1 / SI-914-036R1 Maintenance task add-on for engine suspension frame assembly for ROTAX® Engine Type 916 i (Series), 915 i (Series), 912 i (Series), 912 and 914 (Series).
Video Length: 6:38
This "ROTAX Tool Tips" Video reviews the SI-912 i-002,SI-915 i-002 B.U.D.S. Aircraft Installation Instructions for ROTAX Engine Types 912 i and 915 i (Series).
Video Length: 9:43
This "ROTAX Tech Tips" Video reviews the Service Instruction SI-912 i-004, SI-912-018, SI-914-020, SI-915 i-003 Purging of lubrication system.
Video Length: 11:43
This "ROTAX Tech Tips" Video looks at the Service Instruction PAC SI-PAC-016 "Fuel pump assembly for ROTAX® Aircraft Engines" and the Service Instruction SI-912i-025. It examines fuel pump assembly and instructions for individual fuel pump replacement for fuel injected ROTAX Aircraft Engines of the 912 i and 915 i Series.
Video Length: 3:04
This "ROTAX Tech Tips" Video looks at the Service Instruction PAC SI-PAC-020 "Fuel Pressure Damper Assy." It examines how to check fuel injected engines for fuel pressure isolation - and how an optional fuel pressure damper can help.
Video Length: 5:09
This "ROTAX Tech Tips" Video looks at the MANDATORY Alert Service Bulletin Inspection and/or replacement of fuel pump assy. for ROTAX® Engine Type 912 i and 915 i A (Series). Internal quality checks have shown that in isolated cases, there may be fuel leakage in the front end area of the power connector side. This may lead to a hazardous condition.
Video Length: 5:11
This "ROTAX Tech Tips" Video looks at the Service Letter SL-2ST-012, SL-912-020, SL-914-018, SL-912 i-009 which explains the process of registering your ROTAX aircraft engine online.
Video Length: 10:23
This "ROTAX Tech Tips" Video looks at the Service Bulletin SB-912-071 / SB -914-053 / SB-912 i-009 which covers a MANDATORY inspection of the oil filter on a limited range of ROTAX 912, 914 and 912i (series) engines and spare parts.
Video Length: 5:20
This "ROTAX Tech Tips" Video looks at the Service Bulletin SB-912-071 / SB -914-053 / SB-912 i-009 which covers a MANDATORY inspection of the oil filter on a limited range of ROTAX 912, 914 and 912i (series) engines and spare parts.
Video Length: 5:20
This "ROTAX Tech Tips" Video looks at the Service Bulletin SB-912-070 / SB -914-052 / SB-912 i-008 which covers a MANDATORY inspection of the valve push rods on a limited range of ROTAX 912, 914 and 912i (series) engines and spare parts.
Video Length: 4:44
This "ROTAX Tech Tips" Video looks at the Service Bulletin SB-912-070 / SB -914-052 / SB-912 i-008 which covers a MANDATORY inspection of the valve push rods on a limited range of ROTAX 912, 914 and 912i (series) engines and spare parts.
Video Length: 4:44
This "ROTAX Tech Tips" Video looks at the Alert Service Bulletin ASB-912 i-007 which covers a MANDATORY check of the ignition housing sealing plug on ROTAX 912i (series) engines.
Video Length: 5:55
This "ROTAX Tech Tips" Video provides additional hints and tips for the application of the Fuel Pump Service Kit for ROTAX Engine Type 912 i (Series).
Video Length: 9:43
This "ROTAX Tech Tips" Video looks at the Alert Service Bulletin ASB-912 i-007 which covers a MANDATORY check of the ignition housing sealing plug on ROTAX 912i (series) engines.
Video Length: 5:55
This Expanded Instruction Video looks at the Service Instruction SI-912 i-015 which details the correct procedures for using the service kit to replace all of the rubber parts contained within the fuel pump module. Applies to all ROTAX 912i (series) engines.
Video Length: 16:46
This "ROTAX Tech Tips" Video provides additional hints and tips for the application of the Fuel Pump Service Kit for ROTAX Engine Type 912 i (Series).
Video Length: 9:43
This Expanded Instruction Video looks at the Service Instruction SI-912 i-015 which details the correct procedures for using the service kit to replace all of the rubber parts contained within the fuel pump module. Applies to all ROTAX 912i (series) engines.
Video Length: 16:46
This Product Review Video shows testing of the redundant capabilities of the new Rotax 912iS Fuel Injected 4 stroke aircraft engine.
Video Length: 4:39
This video shows the new 912iS fuel injected Rotax aircraft engine. Presented in a new format of "Rotax Minute" video segments.
Video Length: 1:43
Ever wonder why Rotax recommends the use of thermal paste on the spark plugs? This video discusses the purpose and proper procedures for the use of thermal paste.
Video Length: 3:00
.jpg)
The first video in a new Builder Series format.
This first installment from a series of videos that follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
Video Length: 2:24
This second installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
Among the items discussed in this video is the design of the fuel system. Skytek has come up with a design to meet fuel flow and safety requirements in all flight conditions.
Video Length: 6:19
Clarifies the procedure for flashing of updated ECU firmware on the Rotax 912iS engine - while the ECU is installed in the aircraft. Released in conjunction with service bulletin SB-912i-002.
Video Length: 14:31
This video covers the monitoring of component temperature limits on Rotax 912 / 914 series aircraft engines.
Video Length: 3:11
This third installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
In this video, we look at Skytek's testing and qualification of their fuel system design.
Video Length: 10:58
This fourth installment in a series of videos follows SkyTek as they build a Rotax 912iS fuel injected powered Zenith CH750.
In this video, we look at the engine and instrumentation installation and first engine test runs.
Video Length: 3:18
The fifth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and examines some of the cowling design changes made to satisfy the cooling requirements of the 912iS engine.
Video Length: 9:17
The sixth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains some of the important fuel system design considerations that were required for the 912iS engine.
Video Length: 10:59
The seventh installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains how fuel quality and fuel system design go hand in hand.
Video Length: 13:08
The eighth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains the design considerations of the header tank system.
Video Length: 14:42
The tenth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and demonstrates the simplicity and elegant ergonomics of the panel systems.
Video Length: 9:23
The ninth installment in our series of videos following Skytek as they build a Rotax fuel injected 912iS powered Zenith CH750.
In this video, our ROTAX Technical Expert discusses the first flight of the 912iS-powered CH750 with Zenair test pilot Roger Dubbert, and explains some of the differences between the 912iS and the 912ULS - and the design considerations required for cooling the engine.
Video Length: 13:37
Clarifies the 'bench' procedure for flashing of updated ECU firmware on the Rotax 912iS engine - when the ECU is not installed in the aircraft. Released in conjunction with service bulletin SB-912i-002.
Video Length: 14:07
This Expanded Information Video provides additional information for SB-912i-006 which covers the upgrade of the stator assembly on Rotax 912iS (series) aircraft engines.
Video Length: 23:16
This Expanded Information Video provides additional information for SI-912-025/SI-914-026/SI-912i-010 which introduces a new universal cylinder head torquing procedure for all ROTAX 912, 914 and 912iS engines. This video provides a demonstration of the complete procedure. Video Length: 10:42
This "ROTAX Tech Tips" Video looks at the Service Letter SL-2ST-012, SL-912-020, SL-914-018, SL-912 i-009 which explains the process of registering your ROTAX aircraft engine online.
Video Length: 10:23
|
To receive critical-to-safety information on your ROTAX Engine, please subscribe to |
