EIS engine tach having problems

by James OKane in 2 Stroke Technical Questions 13 years ago

I have a 582 blue head (12 hours) and the engine tach on my EIS will fail during flight ever though the engine is running. I can reset the display and it will read correctly. Also when I turn off one of my ignition switches the tach goes to zero and if I advance the throttle it will show half of what the engine actually is running. The other switch when I close it acts correctly. I contacted EIS, they sent me a new display to try and the same thing happened. Any clue where to look next?

K. O

Re: EIS engine tach having problems

by bill martin » 13 years ago

bill martin

10 757 0

James,

Since you have eliminated the EIS, I would suspect a wiring problem. Maybe a bad connection momentarily somewhere. As for the zero reading when shutting down one ignition, welcome to Rotax two cycle. Almost everyone has suffered through the zero tach syndrome when doing a mag check. Doesn't do it every time and with some engines, never. When this happens to me, I just listen for the RPM drop and ignore the tach.

Bill.

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Rotax 582 engine number	2 Stroke Technical Questions	0
Mandatory Service Bulletin: Inspection and/or replacement of expansion tank assy. for ROTAX® 912, 914, 912 i, 915 i and 916 i (Series) Aircraft Engines	General Tech Discussion	9
exactly what type of engine is this?	912iS Technical Questions	1
pre-heat engine	915iS Technical Questions	1
Mandatory ALERT Service Bulletin: Inspection and Replacement of Oil Spray Nozzle for ROTAX® Engine Types 912 i, 915 i, and 916 i (Series) SB-912 i-016 / SB-915 i-016 SB-916 i-006	General Tech Discussion	36

EIS engine tach having problems

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login