fbpx
Login

 

Jump to Forum..

coolant system temperature

in 912 / 914 Technical Questions 14 years ago
I'd like to mesure the temperature of the coolant system on a Rotax 912 S :do you have tips ?where to put the sensor?
thanks

  • Re: coolant system temperature

    by » 14 years ago

    You can buy from Lockwood or leaf and I think CPS, a hose barb which has a threaded opening in its side to screw a temp sensor into. You cut the water hose going from the engine to the radiator, insert the barb, screw in the sensor, ground it all, and your ready to go.

    Bill.
      
    Report

  • Re: coolant system temperature

    by » 14 years ago

    Hi Gerard,

    You coolant only cools the heads so the coolant is within a few degrees of the CHT's. You can put a water temp probe in, but it really isn't necessary.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Vent hose for 912ULS coolant overflow bottle? 912 / 914 Technical Questions 7
Minor coolant leak on 912ULS 912 / 914 Technical Questions 8
Oil Temperature 912 / 914 Technical Questions 5
Rv-12iS High EGT and Coolant temps 912iS Technical Questions 3
Coolest coolant for 912iS? 912iS Technical Questions 1
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login