fbpx
Login

 

Jump to Forum..

Oil mat inspection

in 912 / 914 Technical Questions 13 years ago
I recently did the first oil change on my 912 ULS (100 HP) with 26 hours. When I inspected the filter mat I found the small metal particles visible on the image attached. They are so thin that you can not even remove them from the mat as they will disintegrate. Being my first oil change I am worried about this finding, do I need any further testing?

Regards,

Miguel
mat.jpg (You do not have access to download this file.)

  • Re: Oil mat inspection

    by » 13 years ago

    Hi Miguel,

    Since this is your first oil change on a new engine I would consider this normal as small areas wear in. Just keep a watch on it over the next oil change or two.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Miguel Reyes
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Filter Mag for oil filter 912 / 914 Technical Questions 4
Air Ingress at Oil Change 912 / 914 Technical Questions 1
Belly Oil 912 / 914 Technical Questions 8
What material is the oil tank lid made of? 912 / 914 Technical Questions 6
Oil line plug caps General Tech Discussion 5
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login