fbpx
Login

 

Jump to Forum..

Epoxy coated fiberglass fuel tanks

in 912 / 914 Technical Questions 13 years ago
Has anyone had problems using Mogas 91-93 octane with 10% Ethanol in this type of fuel tank?

Phase separation and or cloged fuel filters, etc?

Rich

  • Re: Epoxy coated fiberglass fuel tanks

    by » 13 years ago

    If you use a product like Kreem Weiss for a tank coating it will be impervious to the ethanol? Fuel separation should not be an issue or a clogged filter unless your system isn't comparable with the ethanol fuel and parts flake and flow to the filter. Most of us use 91 oct. with ethanol. If your fuel system can handle the ethanol fuel then your far better off than using 100LL which will cause you some high dollar maint. Before TBO.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Rich Provenzano
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Rotax fuel pressure sensor 664365 in Garmin G3X GDU460 915iS Technical Questions 0
Electrical Fuel Pumps General Tech Discussion 0
916 fuel pump alternatives 916iS Technical Questions 9
problem after changing tanks 912 / 914 Technical Questions 2
914 Fuel Pressure/Prop Pitch 912 / 914 Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login