fbpx
Login

 

Jump to Forum..

912 ULS runs rough at 2500 RPM

in 912 / 914 Technical Questions 12 years ago
2009 912 ULS with 500 hours total time. Engine runs rough at 2500 RPM (like one cylinder is misfiring). New Mc Farlane dual throttle cable and new spark plugs. Carb sync is right on at idle, 2500 and 3500 RPM. Engine runs very smooth at idle and above 3000 RPM. Periodically it runs rough around 2500 RPM. Other times it runs smooth at 2500. Mag check at 2500 and 3500 RPM yields 70 RPM drop on either mag.

Tony

  • Re: 912 ULS runs rough at 2500 RPM

    by » 12 years ago

    Hi Tony,

    Sounds like you have most things covered. Since it is intermittent and you have a good mag check my guess is a carb that doesn't control fuel as well as the other or a little roughness in air and the floats don't control the flow as well. I believe it is fuel delivery and maybe nothing you can or need to do if it is a slight roughness.Many engines have a spot in their rpm range they don't run as smooth as the rest of the rpms.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
912 ignition troubleshooting 912 / 914 Technical Questions 5
Seeking Advice on MAP and RPM Limits for Rotax 912ULS (Post-SB-912-079) 912 / 914 Technical Questions 2
912ULS Exhaust Spring Tension 912 / 914 Technical Questions 6
912 air filters replacement 912 / 914 Technical Questions 1
912 Smoke system 912iS Technical Questions 0
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login