Rubber engine mounts

by Ryan Goss in 912 / 914 Technical Questions 12 years ago

I'm in the process of changing the engine mounts on my Rans S-6. I'm having trouble finding the mounts. CPS and Lockwood do not have them. These are about 2-2.5 inches round. Each donut is about .5 - .75 thick. Any idea where I might find them.

Re: Rubber engine mounts

by bill martin » 12 years ago

bill martin

10 757 0

Ryan,

The mounts you describe sound like either a Lord or a Barry mount. They are about the dimensions you describe. they are two round discs. One has a steel sleeve built into it and the other rubber disc fits down over the sleeve. It has a single bolt which goes through the engine mount and frame with no additional flanges or bolts.

My 912 uses the medium hardness Lord mount which I get from Aircraft Spruce. They have pictures of all the different mounts so you should have no trouble matching them with yours.

Bill.

Report
Re: Rubber engine mounts

by Ron Greene » 12 years ago

Ron Greene

5 30 0

Ryan,

The S-6 mounts are available at RANS. Should be part # 912Donut-3, you will need 8 of them.

RANS website parts pdf is located here. http://rans.com/aircraft/PDFs/aircraft_parts_pdf_2011.pdf

Call RAQNS at (785) 625-6346 and ask for aircraft parts.

Ron

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Rotax 582 engine number	2 Stroke Technical Questions	0
Mandatory Service Bulletin: Inspection and/or replacement of expansion tank assy. for ROTAX® 912, 914, 912 i, 915 i and 916 i (Series) Aircraft Engines	General Tech Discussion	9
exactly what type of engine is this?	912iS Technical Questions	1
pre-heat engine	915iS Technical Questions	1
Mandatory ALERT Service Bulletin: Inspection and Replacement of Oil Spray Nozzle for ROTAX® Engine Types 912 i, 915 i, and 916 i (Series) SB-912 i-016 / SB-915 i-016 SB-916 i-006	General Tech Discussion	36

Rubber engine mounts

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login