fbpx
Login

 

Jump to Forum..

912 ULS Oil Tank Clean w/o purge

in 912 / 914 Technical Questions 8 years ago

  • Re: 912 ULS Oil Tank Clean w/o purge

    by » 6 years ago

    ... How would you know if air got into the system? ...


    You will always get some small amount of air in the system.
    The Oil Filter is full of air to start with but it is after the oil pump.
    The first 10 inches of the Oil Pickup tube drained during the Oil change.
    All of this is normal and not of any great concern.
    The Oil pump moves about 3 liters a minute per 1000 rpm.
    At a 2000 rpm idle the Oil filter will be filled in about 5 seconds.

    Before the first start, hand-prop the engine a dozen or so turns.
    You should see some Oil pressure appear on the gauge.
    This will indicate the pump is primed and partially fill the Oil Filter.

    Start the engine and watch the oil pressure closely for the first 30 seconds.
    You may see the pressure fluctuates slightly in the first 10 seconds. But, probably not!
    If it drops to Zero for more than 5 seconds, shut it down.
    After 60 seconds the entire volume of oil has gone around the circuit at least once and any minor air bubbles in the lines are now gone.

    Job Complete!

    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Belly Oil 912 / 914 Technical Questions 8
912 air filters replacement 912 / 914 Technical Questions 1
912 Smoke system 912iS Technical Questions 0
What material is the oil tank lid made of? 912 / 914 Technical Questions 6
Oil line plug caps General Tech Discussion 5
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login