914 tail pipe clamp

by Tom Delaney in 912 / 914 Technical Questions 8 years ago

I am installing the tail pipe on a 914UL in a Magni gyroplane.

It appears that I need a larger diameter clamp. Repeated attempts to engage the bolt have been unsuccessful as the bolt rides against the outer diameter and won't engage the threads.

I cannot locate this clamp in the manuals or on Lockwood's website, regardless I believe I need to locate a larger clamp.

Hope someone can help me!

Tom

FileFeb2474400PM.jpeg (You do not have access to download this file.)

FileFeb2474400PM_2017-02-24.jpeg (You do not have access to download this file.)

Re: 914 tail pipe clamp

by Bill Hertzel » 8 years ago

Bill Hertzel

13 1.95k 7.98k

As fancy as the clamp looks, it is just a common Barrel Band Clamp, made by dozens of manufacturers.
If you feel better getting the same manufacturer, look for the name on the side of the clamp.
The size, usually in millimeters, will also be engraved on the clamp.
Look for a number in the 35 to 40mm range. Another 1-2mm should help a lot.

That said, getting it started might be easier if you engage a few threads and then slide it into position on the pipe before assembly.
Assuming you have the intended clamp, it should fit."

Edit:
Continuing on the theory that the clamp is the correct one for the exhaust...
If this is a new, never used, clamp, Clamp it tightly on the slightly smaller tailpipe.
This may put a little "Stretch" into it and make getting it started on the larger muffler pipe easier.

Alternately, squeezing the clamp closed with a pair of large "Channel Lock" pliers may also do the trick.

Bill Hertzel
Rotax 912is
North Ridgeville, OH, USA
Clicking the "Thank You" is Always Appreciated by Everyone.

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
914 turbo overboost/crankshaft distortion symptoms?	912 / 914 Technical Questions	2
914UL Turbocharger	912 / 914 Technical Questions	2
914 Fuel Pressure/Prop Pitch	912 / 914 Technical Questions	2
ROTAX 914 fuel pumps	912 / 914 Technical Questions	1
Service Instruction: Installation of a propeller by usage of round-neck nut set for ROTAX® 912, 914, and 912 i (Series) Aircraft Engines	General Tech Discussion	9

914 tail pipe clamp

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login