fbpx
Login

 

Jump to Forum..

Bing carb choke question

in 912 / 914 Technical Questions 8 years ago


I was going over my Bing carbs on my 80hp and noticed two different sized vent holes? My manual does not mention anything regarding two different sized holes. They are however marked right and left . My issue is long cranking on cold startup and no other issues. The choke did not seem to make any difference when pulled. Any thoughts or comments would be wonderful.

Thanks
Chris
14936779089021408868165.jpg (You do not have access to download this file.)

  • Re: Bing carb choke question

    by » 8 years ago

    Don't think of it as left or right. See attachment, (L) is for Carb for cylinders 1/3, (R) is for Carb for cylinders 2/4



    Ron Greene
    chokeinfo.pdf (You do not have access to download this file.)
      
    Report

  • Re: Bing carb choke question

    by » 8 years ago

    While your looking at these make sure the small center punch mark on the outside end of the choke shaft is facing to what looks like a small pipe coming out the choke body.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Ron Greene
      
    Report

  • Re: Bing carb choke question

    by » 8 years ago

    someone has drilled out the hole or you have a miss-match of carbs (and or choke disc valve.
    In 2004 the hole was enlarged to 1.0mm. Prior to 2004 the hole was 0.65mm
      
    Report

  • Re: Bing carb choke question

    by » 8 years ago

    Thanks everyone for the info! On further investigation looks like someone installed the choke housing on the wrong sides. Also thanks for the PDF. Nice to look at and informative. Once the new gaskets show up I look forward to firing this back up to see the difference.
      
    Report

  • Re: Bing carb choke question

    by » 8 years ago

    Just a follow up on my issue of long cranking on cold startup. I matched up the bleed hole that was undersized with a drill bit and re assembled the carbs the proper way then rotated the choke levers. Fired right up in cold temperatures. Fixed my issue. Sure makes me a happy camper!

    Chris
    Thank you said by: RotaxOwner Admin
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Carb sync varies over throttle range 912 / 914 Technical Questions 5
No 912uls carbs in US?! Rotax-Owner Community 1
Engine Registration Questions General Tech Discussion 1
New carb socket fits loose 912 / 914 Technical Questions 67
Engine will not make power after carb install, post-overhaul General Tech Discussion 42
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login