fbpx
Login

 

Jump to Forum..

IVO Prop Bolt

in 912 / 914 Technical Questions 6 years ago
I am attempting to install a IVO prop onto my Rotax engine. I think they sent me the wrong bolts as they won't thread. My engine serial # 4152255. Does anyone know what my flange bolt threading is? I need the large holes.

  • Re: IVO Prop Bolt

    by » 6 years ago

    The prop flange is Not threaded.
    See the installation Manual Chapter 61-00-00, Section 1.1, Page 4.

    Whoever installed the original propeller installed threaded bushings in the holes of the prop.

    They are most likely Metric.
    Measure the OD of the Bolt to determine its diameter. ex. 8mm
    Measure the length of 10 threads and divide that number by10 to determine the Pitch.
    ex.15mm for 10 threads = 15/10 = 1.5mm Pitch
    You would now know you have an M8x1.5 Bolt

    Or take a bolt to your local Hardware store and Find a Nut that fits it.
    Do NOT buy your prop bolts from the Hardware store.

    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.

      
    Report

  • Re: IVO Prop Bolt

    by » 6 years ago

    Looks like I have a 8mmx1mm (messured 7.9mm).

    I'll try to hunt down these bolts. Unfortunately my only option is to order them online I think.
    Rotaxprop.jpg (You do not have access to download this file.)
    Rotaxprop2.jpg (You do not have access to download this file.)
      
    Report

  • Re: IVO Prop Bolt

    by » 6 years ago

    So after a lot of searching I have discovered that my flange is in fact threaded. It is the early style that has a 8mmx1.25 threaded bolt pattern. My engine is a 93 and they switched to the thru hole flange in 95. It is also 8mm instead of the 10mm that was also changed.

    In my search for bolts it seems that class 8.8 is the right ones to get at 70mm long. I can get these from my local hardware store. Is there a better source for these bolts that hold this same class?
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Corect setting with variable pitch propeller? 912 / 914 Technical Questions 3
914 Fuel Pressure/Prop Pitch 912 / 914 Technical Questions 2
Service Instruction: Installation of a propeller by usage of round-neck nut set for ROTAX® 912, 914, and 912 i (Series) Aircraft Engines General Tech Discussion 9
ROTAX 914 IVO PROP General Tech Discussion 2
Prop flange rust? General Tech Discussion 17
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login