Oil Change video, Drain polt totque

by Jan Nademlejnsky in 912 / 914 Technical Questions 5 years ago

I watched and listen several times the video for oil change for Rotax 912. I understood to use 225 in.lb torque on the oil drain bolt. It seems to me too high. Is this correct? it is very difficult to understand that important number. I wish these numbers were shown in text too, so there is no confusion.
Could you let me know, please?
Thanks
Jan
jannadem@shaw.ca
Freedom of Flying

Re: Oil Change video, Drain polt totque

by James Stricker » 5 years ago

James Stricker

16 90 106

You should torque to 25Nm or 18.5 Ft/lbs for the oil tank drain plug. The torque value is in the Line Maint. and Parts manual.

Report
Re: Oil Change video, Drain polt totque

by David HEAL » 5 years ago

David HEAL

23 191 439

Also be sure to "double-wrench" the oil drain plug when you remove and retorque the plug. Use one wrench on the tank boss and one wrench on the plug so as not to unduly stress the tank boss.

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Belly Oil	912 / 914 Technical Questions	5
What material is the oil tank lid made of?	912 / 914 Technical Questions	6
Oil line plug caps	General Tech Discussion	5
Oil Temperature	912 / 914 Technical Questions	5
Silent Hektik oil thermostat	912iS Technical Questions	10

Oil Change video, Drain polt totque

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login