fbpx
Login

 

Jump to Forum..

Loosing RPM on my 914

in 912 / 914 Technical Questions 14 years ago
Hello All
Having trouble with my 914. It looses
500 rpm on take off when going through the throttle gate from 100% to 115%
Have tried everything to fix it
Can anyone help
Regards Greg

  • Re: Loosing RPM on my 914

    by » 14 years ago

    Greg,
    May I ask for some more details in order to help you with this issue?

    What is your manifold (airbox) pressure at 100% and at 115%?
    Do you have fuel pressure or a differential airbox / fuel pressure gauge installed?
    Have you connected to the TCU (Turbo Control Unit) and calibrated the throttle position?
    What kind of propeller do you have - fixed pitch or constant speed / variable?


    Regards,
    Rotax Owner
      
    Report

  • Re: Loosing RPM on my 914

    by » 14 years ago

    Back again
    Ithink I may have fixed it. The previous owner overtightend the caby bowls which caused air leaks hence running lean under boost, it took its toll trying to figure it out. Thanks for your interest.
    Regards
    Greg
    Thank you said by: Capt. Siva,
      
    Report

  • Re: Loosing RPM on my 914

    by » 14 years ago

    On a 914 turbo charged engine, incorrect pressure in the carburetor float bowls, caused by improper float bowl sealing (overtorquing included) or leaking reference lines from the carburetors to the airbox / shuttle valve can cause stumbling and hesitation throughout the RPM range.

    If your float bowls have been over torqued, they may have been "warped" and are not sealing against the float bowl gaskets. You can gently "lap" the float bowls on fine wet / dry sandpaper placed on a flat surface (glass or machine plate) and some WD40.

    If you suspect your float bowls have been over toqued, check to see that the float pins in the bowl (brass pins on which the floats ride up and down) are still parallel to the sides of the float bowl. If the float bowls are warped, the pins can be tilted over and possibly bind the floats against the wall of the float bowl.

    The torque value for the float bowl attachment screw is 48inlb.
      
    Report

  • Re: Loosing RPM on my 914

    by » 6 years ago

    Same problems occurred with me.
    Good answer.
    I have changed the bowl , nut and .ring.
    Problems solved
      
    Report

  • Re: Loosing RPM on my 914

    by » 3 years ago

    Hello all. 

    I am facing same problem with 914 F. While moving throttle from 100% to 115 % RPM reaches to 5400 and looses to 5200. Whereas all parameters are normal including Map. Both carbs are also replaced with serviceable one. Problem is still exists. Can anyone jelp

    Regards

    Naveed

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Seeking Advice on MAP and RPM Limits for Rotax 912ULS (Post-SB-912-079) 912 / 914 Technical Questions 2
912is rpm drop 912iS Technical Questions 22
RPM Drop in 912ULS 912 / 914 Technical Questions 3
RPM Drop in 912ULS 912 / 914 Technical Questions 21
914 turbo overboost/crankshaft distortion symptoms? 912 / 914 Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login