Lane B Dead

by Tim in 912iS Technical Questions 5 years ago

I disconnected the battery some weeks ago to relocate the battery box and after reconnectnig today, Lane B is totally dead. No auxilary fuel pump, EMU is receiving no data on Lane B, no warning lights for either Lane A or Lane B, etc. HIC A and B were never disconnected nor were any other harnesses, connections to fuse box, etc. I've not opened the fuse box yet but will start there. If anyone has an idea on where to begin tracing this down, I'd appreciate some advice.

Thanks.

Tim

Re: Lane B Dead

by geoff klestadt » 5 years ago

geoff klestadt

3 11 36

From an absolute novice..... Fuse box? Fuse F2 "Selector switch B". Heavy maintenance manual section 76 -10 - 00 page 39.

After that I give up.

Report
Re: Lane B Dead

by Tim » 5 years ago

Tim

9 19 60

False alarm! After closer inspection, one of my zip ties holding the HIC harnesses in place was wrapped around the connector tab (locking tab), which resulted in the connectors comming lose. All good now.

Tim

Thank you said by: Bill Hertzel, RotaxOwner Admin

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Solid Lane B Light	912iS Technical Questions	0
Lane A/B failure- what is powered by batt?	912iS Technical Questions	12
916 is Lane malfunction	916iS Technical Questions	1
CAN Bus data / Issue with Lane A Voltage	912iS Technical Questions	4
New installation, Lane B issues	915iS Technical Questions	3

Lane B Dead

Safety First!

Recent Videos

Log In/Out

Login