Login

Fine Filter Exit Fitting Size

by Eric Decker in 912iS Technical Questions 3 years ago

Hello, The exit port on the Rotax Fine Filter appears to require an NPT fitting with an ID of 3/8". Any feedback would be much appreciated. Thanks!

Re: Fine Filter Exit Fitting Size

by Jeff B » 3 years ago

Jeff B

14 601 2.18k

The inlet threads are 14mm-1.5, and the outlet threads are 12mm-1.5. These are not tapered threads, both ends use copper sealing washers between the filter and fitting.

Thank you said by: RotaxOwner Admin

Report
Re: Fine Filter Exit Fitting Size

by Jon Tensfeldt » 3 years ago

Jon Tensfeldt

1 58 188

The RV-12iS uses a 12mm X1.5 double banjo bolt.

31616_2_fuel filter.jpg (You do not have access to download this file.)

Thank you said by: RotaxOwner Admin

Report
Re: Fine Filter Exit Fitting Size

by Eric Decker » 3 years ago

Eric Decker

1 5 9

Jeff, Thank you for your quick response and input. Eric

Report
Re: Fine Filter Exit Fitting Size

by Eric Decker » 3 years ago

Eric Decker

1 5 9

Thanks Jon - Very helpful!

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Loctite/Anti-Seize on 912ULS Oil Fitting?	912 / 914 Technical Questions	1
Wire size vs current incongruity	General Tech Discussion	5
Recommended 912ULS Air Filter?	912 / 914 Technical Questions	10
Filter Mag for oil filter	912 / 914 Technical Questions	9
912 air filters replacement	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login