fbpx

 

I have searched this fuel pressure sensor connector but can't seem to find were the three wires go to.

The sensor itself came mounted by the fuel filter on the kitfox fwf part of the build.

The sensor connector 881302 was shipped with my engine with no wiring diagram and so far I cant find the pinout for the 3 wires on the sensor plug or where the other end of the wire hooks to on my engine control unit or garmin gea24, I'm not sure where it hooks to. I cant find any info. 

If anyone knows the pin out and location where the 3 sensor wires go to I would be thankful.

Thanks Harlan Payne

 

My build

https://www.youtube.com/channel/UC5A6LMV2VoCVUP15G0uB-Yw

 

  • Re: Rotax sensor connector 881302 fuel pressure

    by » 3 years ago


    That video shows a wing being built on a KitFox

     


    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


  • Re: Rotax sensor connector 881302 fuel pressure

    by » 3 years ago


    I am going to put on my Psychic Hat (Magic Mirror?), Close my eyes, and say the Magic Words, "Romper Bomper Stomper Do ..."...

    What I see is a Fuel Pressure Gauge Connector that you connect to Pins 1,2, and (3or4) of J243 of the GEA24.

    Pin 1 = Ground
    Pin 2 = Signal
    Use Pin 3 if  your sensor's V+ =12v
    Use Pin 4 if  your sensor's V+ =5v

    I can't see the wire colors.
    If they are Red, Black, and another color; that would be Red = V+,  Black = Ground,  and the OTHER Color = Signal

    Otherwise, Brown = V+,  Blue = Ground, and Black = Signal   (Crazy, I know!, But it is the Industry Standard.)

    (End of Magic Trick!)


    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.


    Thank you said by: RotaxOwner Admin

You do not have permissions to reply to this topic.