Exhaust Muffler change out on 914

by Ken Berger in General Tech Discussion 12 years ago

I need to change my 914 muffler. Is there a torque spec on the nuts that I must remove? Do I need to use any antiseize on the threads? Any other tips from those who have done before?

Re: Exhaust Muffler change out on 914

by bill martin » 12 years ago

bill martin

10 757 0

Ken,

There is a torque spec for the nuts. You can find them in the installation manual under the support tab at the top of the page. As for antisieze, I am a firm believer in that stuff, especially in areas of high heat like the exhaust manifold bolts. Another reason for the antisieze in this area are the dissimilar metals. I may be wrong, but I think the manifold nuts are aluminum on a steel bolt.

Bill.

Report
Re: Exhaust Muffler change out on 914

by Ken Berger » 12 years ago

Ken Berger

3 6 0

Thanks for the input, Bill.

I did find a torque spec in the Heavy Main Manual for the muffler nuts of 18.5 ft lbs. No mention of antiseize but I agree that would be normal procedure.

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Mandatory Service Bulletin: Inspection and/or replacement of expansion tank assy. for ROTAX® 912, 914, 912 i, 915 i and 916 i (Series) Aircraft Engines	General Tech Discussion	9
Loss of Oil Pressure During Flight on 914	912 / 914 Technical Questions	16
Rotax 505 / 503 part interchangeability	2 Stroke Technical Questions	5
Air Ingress at Oil Change	912 / 914 Technical Questions	1
912ULS Exhaust Spring Tension	912 / 914 Technical Questions	6

Exhaust Muffler change out on 914

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login