Float guide leak Rotax 912

by simon echelard in General Tech Discussion 8 years ago

After having discovered a small leak under the carburator bowl , i removed the right bowl and saw the float guide r/h side with play ;
Question :
Did anybody met this kind of problem , and whitch is the best solution to fix this problem ?
thanks
best regards
Simon and Hubert

Re: Float guide leak Rotax 912

by Roger Lee » 8 years ago

Roger Lee

128 5.28k 4.98k

If it's already coming out just remove it. Clean the hole with some laquer thinner and then put some Loctite 648 in the hole and on the pin. Then it must be pressed back in place. Do not Ben it. It doesn't take that much force to seat it.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: simon echelard

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
engine flooded after leak down test	912 / 914 Technical Questions	2
912 ignition troubleshooting	912 / 914 Technical Questions	1
Rotax fuel pressure sensor 664365 in Garmin G3X GDU460	915iS Technical Questions	0
Seeking Advice on MAP and RPM Limits for Rotax 912ULS (Post-SB-912-079)	912 / 914 Technical Questions	2
912ULS Exhaust Spring Tension	912 / 914 Technical Questions	6

Float guide leak Rotax 912

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login