Login

Engine overhauled

by Arash in General Tech Discussion 6 years ago

Page 2 of 4

Start
Prev
1
2
3
4
Next
End

Re: Engine overhauled

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

You're right it doesn't looked like it's been overhauled or had the case split. Looks like the wrong sealant for the gearbox to. All the dirty oil stuff looks old and never cleaned off. The magnetic plug isn't safety wired and neither are the exhaust springs and no silicone on the springs. Take a close look at the hoses and see if all look new.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Engine overhauled

by Arash » 6 years ago

Arash

2 6 3

Dear Roger Lee
Thanks fo your answers, do you have picture of a good overhauled engine .
Thanks

Report
Re: Engine overhauled

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

Sorry I don't.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Engine overhauled

by Capt. Siva, » 6 years ago

Capt. Siva,

25 266 738

Roger Lee, Hi, after overhauling , what type of QUALIFICATION tests are required for 914/912 Engine.?

Report
Re: Engine overhauled

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

No special qualification. Do a really good oil purge ( I'm paranoid so I usually do 2) and run it and make sure right up front that engine pressure and the like are all good.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

Page 2 of 4

Start
Prev
1
2
3
4
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Engine RPM	912 / 914 Technical Questions	9
Quality of Swtiches used for Engine Power	General Tech Discussion	9
Engine Time has Jumped	912iS Technical Questions	3
engine coolant	General Tech Discussion	1
Engine Assembly Grease	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login