Hello,
I got the black engine suspension frame, which seams very strong and proffisional build. The engine side is the same. However the "fuselage" side is different. As you can see the white standard engine mount has 270mm between the top and the lower mounting points. The difference in mine is that the distance is only 210mm since the bottom mounting points are placed a little more to the top. The original mount is also flat at the bottom and mine is round.
Dimensions are not a problem since I am building the ring to fuselage mount. My question is, does this kind of mount have some problem for the operation or it is fine structurally? It is something I should be worried?
Thank you a lot,
Filipe
8510_1_1.jpg (You do not have access to download this file.)
8510_1_2.jpg (You do not have access to download this file.)
8510_1_3.jpg (You do not have access to download this file.)
