fbpx

 

I have two questions on this subject;

Is there a supply problem with the Extra Large Oil Radiator (Cooler) 886107?

Other than dimensional differences (larger in one plane)) I am unable to find out any more technical information on the Extra Large Oil Radiator (Cooler) 886107;

How may additional (to the Large Oil Radiator) tubes does it have?

  • Re: Extra Large Oil Radiator (Cooler) 886107

    by » one year ago


    Shorly someone has one or both unswears


  • Re: Extra Large Oil Radiator (Cooler) 886107

    by » one year ago


    I have tried to source 886107 around the World - no luck the minimal feed back I have received would sugest that there is a problem with Rotax parts supply - anyone have information on this?


  • Re: Extra Large Oil Radiator (Cooler) 886107

    by » one year ago


    I have discovered that 886107 may be available in Holland - any Dutch readers of this Forum, that would be willing to facilitate the purchase?


  • Re: Extra Large Oil Radiator (Cooler) 886107

    by » one year ago


    Hi Sean,

    I have a new one still in the box out at my hanger.  Later today I’ll take some close-up photos and post them.  All the fittings are the same, and I believe it’s the same width and depth.  The only difference is the stack height (number of rows). I purchased it a year ago here in the USA, and I think it took a month or so to get.    


    Thank you said by: Sean Griffin

  • Re: Extra Large Oil Radiator (Cooler) 886107

    by » one year ago


    Jeff Blakeslee wrote:

    Hi Sean,

    I have a new one still in the box out at my hanger.  Later today I’ll take some close-up photos and post them.  All the fittings are the same, and I believe it’s the same width and depth.  The only difference is the stack height (number of rows). I purchased it a year ago here in the USA, and I think it took a month or so to get.    

    Wow!!!!

    Thanks Jeff,

    I would like to go to person to person communication on this but don't know if this Forum has a confidential contact facility. If it does & you know how to contact me, please do so.

    As for the oil cooler; just to be sure we are on the same "wave length" - I have the Large Oil Radiator (cooler) 886004 (new  number 88605) which is not quite able to achieve the cooling (in my installation) that I would like, hence my desire to acquire Extra Large Oil Radiator (cooler) 886107 (old number 886106).

    Rotax Service Instruction SI-912-024 R1 shows very little difference (does not list changes)  between the new 886107 and old 886106 showing only the deletion of a mounting Hex .nut M22x1.5.


You do not have permissions to reply to this topic.