Challenger with 582

by Don Darling in 2 Stroke Technical Questions 9 years ago

Hello

New to the forum and trying to get my challenger fit for flight. I have a 582 blue head with the sheer technologies radiator. Can someone help me understand the procedure for removing coolant? Im having a slight overheating issue and i'm not sure of the coolant to water mixture, so I was going to change that out. I'm on the east coast of Canada so will need to be a mix fit for freezing weather.

Thanks

Re: Challenger with 582

by Jordan Paskevich » 8 years ago

Jordan Paskevich

1 17 0

You want to use a 50/50 mix (Obviously) and the best (quickest way) to drain the coolant is to remove the center Allen head bolt on the cylinder head. Make sure you remove the rad cap so it drains quicker. You can also pull a rad hose to drain whats left in the radiator.

Also... Make sure your coolant system vented properly. There should be a vent line from the top of your water pump housing to either you expansion tank or the top hose (t fitted) of your radiator (see attachment)

InvertedCoolant582.pdf (You do not have access to download this file.)

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Purchase rotax582 engine	Rotax-Owner Community	1
Rotax 582 Midrange Tuning	2 Stroke Technical Questions	2
Fuel coloring for Rotax 582s	Engines	3
Rotax 582 SN 5236683	2 Stroke Technical Questions	0
Year 582	2 Stroke Technical Questions	1

Challenger with 582

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login