Sparkplug and sparkplug connector

by Peter Opheij in 2 Stroke Technical Questions 8 years ago

Hi there,
I have a 582 on my AC Clipper.
Default it had a sparkplug BR8ES with a 5K resistor inside and Bosch sparkplug connector with a 1K resistor.
I replaced the sparkplug conn with one with a 5K resistor inside.
Should I now use a sparkplug with no resistor inside?? or is the total value not that important??

Peter

Re: Sparkplug and sparkplug connector

by Jordan Paskevich » 8 years ago

Jordan Paskevich

1 17 0

The stock NGK spark plug caps are a LB05EZ with a 5K resistor and the appropriate spark plug is a NGK BR8ES with non-removable/non-threaded end cap. Do not use spark plugs with removable threaded end caps.

The proper gap is .018 - .020"

Stick with stock components and you cant go wrong!

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Rotax Sparkplugs	912 / 914 Technical Questions	7
ECU connector grounds	915iS Technical Questions	1
HIC connector removal	912iS Technical Questions	3
915iS fuel pump connector specs	915iS Technical Questions	19
Ignition Coil Connector	912iS Technical Questions	1

Sparkplug and sparkplug connector

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login