we just overhauld a 914 engine and when we rich at 4800 RPM we got a turbo lag for riching 5500 RPM and it takes about 3 to 5 seconds and only reaches 5100 to 5200 RPM, so what shall we do i need your help guys ty so much
by Joaquim Fonseca » one month ago
1- Check the engine running with TLR (airbox temp, servo position, airbox pressure vs target, fuel pressure, etc)
2- Check if there are no leaks in the big hoses (if you have intercooler, from Turbo and to airbox; from airbox to carburators) and the small ones connected to the airbox
3- Check wastegate free movement
by arsham » one month ago
i have checked all before
by Rotax Wizard » one month ago
Joaquim
The turbo works on exhaust pressure. Any lag suggests a communications error or problem with the set up of the cable and setpoints. Be sure that your vent/map hoses are all new (should have replaced at overhaul) What MAP pressure do you have at 100% and 115% settings?
Cheers
|
To receive critical-to-safety information on your ROTAX Engine, please subscribe to |
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
You have declined cookies. This decision can be reversed.
You have allowed cookies to be placed on your computer. This decision can be reversed.
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
