.png)
Oil Purge required?
in 912 / 914 Technical Questions
12 years ago
I've got the spring, plug screw and valve piston to replace on the oil pump because I've noticed a gradual decrease in oil pressure on my 912ULS over the past 5 years. Will this induce air into the system requiring a purge?
Also, since I replaced my magnetic plug it has leaked a small amount of oil. I've checked torque with a calibrated torque wrench and it is correct. Though a gasket is not called for by Rotax would it be acceptable to try a thin copper gasket? Any other suggestions?
Thanks - Mike
Also, since I replaced my magnetic plug it has leaked a small amount of oil. I've checked torque with a calibrated torque wrench and it is correct. Though a gasket is not called for by Rotax would it be acceptable to try a thin copper gasket? Any other suggestions?
Thanks - Mike
