fbpx
Login

 

Jump to Forum..

Fuel Pump - Pressure variation

in 912 / 914 Technical Questions 10 years ago

  • Re: Fuel Pump - Pressure variation

    by » 6 years ago

    Fuel pump pressure , i replaced my fuel pump aged out, the new pump has higher pressure, note the new pump is in it spec.range the old pump meets the old spec. running at cruiz with the new pump it runs rich installed old pump runs fine. LEAF told me that they have to do something to most Carb's (85.00 per carb) to work correctly with the new higher pressure pump. My question is what do they do ?? and is this modification standard
    gene
      
    Report

  • Re: Fuel Pump - Pressure variation

    by » 6 years ago

    No magic here. Just make sure your floats weigh under the 7 grams per set and then make sure the float armature arms are set to the proper height. The carbs must be off and upside down to measure and check this.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Eugene M Manley II
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Differential Pressure Tester - $75 Tools 1
Fuel pump pressure drop 912iS Technical Questions 15
One engine using too much fuel 912 / 914 Technical Questions 9
Rotax 912 80hp no oil pressure after oil change 912 / 914 Technical Questions 9
Low low fuel pressure and flow at high altitude 912 / 914 Technical Questions 18
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login