coolant hoses

by Tj Sch in 912 / 914 Technical Questions 10 years ago

I want to do the 5 year rubber replacement and want to know where to buy the coolant and oil hoses for my 912 in Ontario Canada. The sizes seem to be unusual.

Re: coolant hoses

by Roger Lee » 10 years ago

Roger Lee

128 5.28k 4.98k

The hoses on top of the engine and the two along the bottom of both sides are 17MM ID. There is no substitute for this hose size. I have seen a few try, but it is just sloppy work. The one large hose that comes off the coolant tank is 25mm or 1" ID.
The oil hoses are 13mm or 1/2" ID.

You can buy these hoses from your Canadian distributor or one of the US distributors. The distributor's may not all have the identical hose, but will have their equivalent. The 17MM will most likely be the same. The other two may be different.

http://www.rotec.com/

http://www.rotec.com/rotax-canadian-repair-centers

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Cooling system Silicon hoses	General Tech Discussion	6
Rv-12iS High EGT and Coolant temps	912iS Technical Questions	3
Coolest coolant for 912iS?	912iS Technical Questions	1
engine coolant	General Tech Discussion	1
Replacement hose for coolant overflow bottle?	912iS Technical Questions	2

coolant hoses

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login