fbpx
Login

 

Jump to Forum..

914 turbo

in 912 / 914 Technical Questions 10 years ago
Thanks Roger will try the w d 40 but boy are they ever tight

  • Re: 914 turbo

    by » 10 years ago

    If they have some corrosion apply the WD40 and tap on the nut and you may be able to break it up enough to loosen it. You can also take a small butane torch and apply the heat to the nut and get it hot. Then try to break it loose after the WD40 treatment. My bet is it will come loose with this.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 914 turbo

    by » 10 years ago

    Will try that and let you know thanks again for the suggestion
    Rick
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Mandatory Service Bulletin: Inspection and/or replacement of expansion tank assy. for ROTAX® 912, 914, 912 i, 915 i and 916 i (Series) Aircraft Engines General Tech Discussion 13
Loss of Oil Pressure During Flight on 914 912 / 914 Technical Questions 16
914 turbo overboost/crankshaft distortion symptoms? 912 / 914 Technical Questions 2
914UL Turbocharger 912 / 914 Technical Questions 2
914 Fuel Pressure/Prop Pitch 912 / 914 Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login