Carb heat Cable

by bob Strakele in 912 / 914 Technical Questions 9 years ago

Hi Friends, I have an issue with my carb
heat On my S7S with. 912. When I pull
It on to active heat it works but as soon as I let go of the knob it goes to the off
Position and closes. My environment is subject to significant carb ice in summer.
I am thinking about replacing cables. One
Other thing I didn't have this problem. 60
hours ago . Appreciate any suggestions .

Thanks , Bob
Rans S7S
N954K

Re: Carb heat Cable

by Bill Russini » 9 years ago

Bill Russini

5 9 0

I have a recent similar problem with my 912 ULS, however my plane has a manual 'twist' on/off valve. The 'off' position is 3 o'clock; a 1/4 counterclockwise turn to 12 o'clock is the 'On' position. The valve appears to be stuck, and I am only able a turn to the 1:30 position and then it wants to close. The engine when new had no problem cycling from the the 3 - 12 o'clock position.

Thanks,

brussini

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Carb sync varies over throttle range	912 / 914 Technical Questions	5
How to test ignition cable?	912iS Technical Questions	10
No 912uls carbs in US?!	Rotax-Owner Community	1
New carb socket fits loose	912 / 914 Technical Questions	67
Engine will not make power after carb install, post-overhaul	General Tech Discussion	42

Carb heat Cable

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login