Login

black charcoal

by Carlos Seliman in 912 / 914 Technical Questions 8 years ago

black charcoal

Re: black charcoal

by Carlos Seliman » 8 years ago

Carlos Seliman

1 2 0

black charcoal in the mufleer 912ul

Report
Re: black charcoal

by Roger Lee » 8 years ago

Roger Lee

128 5.28k 4.98k

Hi Carlos,

Some black soot in the exhaust may be normal if you idle a lot. When just sitting on the ground try and keep idle up to at least 2k rpm. Excessive black soot could be a sign of burning too rich and or running too much at low rpms or burning some oil. If you have no evidence of using oil (not likely) then make sure your cruise rpm is up in the 5K rpm range. Many seem to be right around 5100-5400 rpm. I'm usually around 5200 rpm. An over pitched prop could add to your black exhaust problem. Make sure the spark plug gap is within specs, .023-.027 for the gap. Burning too rich in fuel can be from high elevation and altitude operations, the needle clip in the carbs are in the wrong slot.

These are a few common causes that you should check.

Like I said some black soot may be normal.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: Carlos Seliman

Report
Re: black charcoal

by Carlos Seliman » 8 years ago

Carlos Seliman

1 2 0

Roger
That's for your response

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
912is - FIRST OIL CHANGE - Blackstone Lab - Oil Report	912iS Technical Questions	1
Technical Information on a ROTAX 912 engine with black cylinder head cover	912 / 914 Technical Questions	6
Black specks coming from exhaust 914UL	912 / 914 Technical Questions	1
Bad vibration with a duc flashblack constant speed propeller	Rotax-Owner Community	0
black spark plugs, probably oil burning	912 / 914 Technical Questions	6

Top

© Rotax-Owner.com

Login