Rotax 912UL and high EGT
in 912 / 914 Technical Questions
7 years ago
Hi. I installed today 2 egt probles ( I bought from skydrive set 2*probe and double gauge).
I have them 100mm from engine flange (this part of pipe is just straight on both rear cylinders (3,4).
During flight on cruise I have high temp, at 5200rpm, 2000ft its rising up to 880*C and should be 800, 850max.
Coolant (cyl2) and oil is cool..
I recently installed airbox, I changed like is in manual jets to 155, clip's are on standard position what can be?
How enrich mixture? Change clip position or jet?
I have them 100mm from engine flange (this part of pipe is just straight on both rear cylinders (3,4).
During flight on cruise I have high temp, at 5200rpm, 2000ft its rising up to 880*C and should be 800, 850max.
Coolant (cyl2) and oil is cool..
I recently installed airbox, I changed like is in manual jets to 155, clip's are on standard position what can be?
How enrich mixture? Change clip position or jet?
21769788_1679389002094967_388711626_n.jpg (You do not have access to download this file.)
