Mag drop

by preston boley in 912 / 914 Technical Questions 6 years ago

1995 r0tax ,80 hp kitfox runing rough on left mag at low revs ,plugs on number one black all others good,we have done ohhms checkon all electrics moved motor forward to check triger coils all set to 20 thou is that maximum gap ok ,new floats and gaskets in the carbys with fresh balance i have run out of idears can sombody advise me on a fix thanks preston

Re: Mag drop

by Peter » 6 years ago

Peter

2 10 0

The manual says 12-16 thou, or 0.3-0.4mm for the gap. I had a similar sounding problem recently and chased it down to one coil being set at 21 thou. Engine ran fine with 50-75rpm drop at 4000 but rough and a few hundred drop at 3000 or so and below on one side. Cured by resetting to 14 thou. Starting improved too.

Peter

Report
Re: Mag drop

by preston boley » 6 years ago

preston boley

1 1 0

Thanks for that i will try that ,its driving me mad they are so good when they are runing well i will let you know how i go preston

Report
Re: Mag drop

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

Trigger coil gaps are best set to minimum gap vs maximum gap.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Mag drop

by Gerad Poxleitner » 6 years ago

Gerad Poxleitner

3 16 0

Other thing to try is switch your ignition boxes see if it fallows the box I had that happen to me this summer did a lot of stuff to fix it and the new mags or ignition boxes fixed it

Thank you said by: preston boley

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Filter Mag for oil filter	912 / 914 Technical Questions	9
912is rpm drop	912iS Technical Questions	28
RPM Drop in 912ULS	912 / 914 Technical Questions	3
RPM Drop in 912ULS	912 / 914 Technical Questions	21
Damaged ECU casing	912iS Technical Questions	8

Mag drop

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login