fbpx
Login

 

Jump to Forum..

Carburetor choke lever stuck

in 912 / 914 Technical Questions 6 years ago
One of my carburetor choke lever on the carburetor is stuck it doesn't move at all.
(Engine is 0 hours stored for 4 years) we are installing it on to a new machine.

Any ideas what could have gone wrong?

  • Re: Carburetor choke lever stuck

    by » 6 years ago

    It may have some corrosion or dried fuel or whatever on the inside. Just remove it and clean it. The center shaft will push out of the housing once the housing is off the carb. There is no need to remove the carb. Take some carb cleaner and a scotchbrite pad and clean the choke inside edges once you push the center out to remove any old dry buildup.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Carburetor Piston Wear 912 / 914 Technical Questions 8
Random Carburetor dripping seeping drooling 912 / 914 Technical Questions 14
WTB 503 Choke Assembly 2 Stroke Technical Questions 0
Engine/carburetor problem 912 / 914 Technical Questions 9
Carburetor sync at 100hr 912 / 914 Technical Questions 4
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login