EGT distance from exhaust flange

by Larry Olson in 912 / 914 Technical Questions 6 years ago

I'm planning to put a clamp-on type EGT probe on each of the two rear cylinders of my 912ULS exhaust headers. How far from the exhaust flange should they be placed? How critical is the distance to assure a reasonable temp reading?

Re: EGT distance from exhaust flange

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

100mm or 3.9”. This is in the Installation manual. They all need to be the same when you install them. You can drill the hole in any angle that will give you the best clearance in that particular area.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
912ULS Exhaust Spring Tension	912 / 914 Technical Questions	6
Strange EGT and CHT	912 / 914 Technical Questions	10
Rv-12iS High EGT and Coolant temps	912iS Technical Questions	3
Rough running / high EGT	912iS Technical Questions	13
Rough running / high EGT	912iS Technical Questions	0

EGT distance from exhaust flange

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login