fbpx
Login

 

Jump to Forum..

magnetic plug 912iS

in 912iS Technical Questions 10 years ago
where in the illustrated parts (or any other publication) does the part number for the magnetic plug and washer appear?

  • Re: magnetic plug 912iS

    by » 10 years ago

    Its in the oil section: chapter 79-20-00 Page 6.

    Magplug912iSIPC.jpg (You do not have access to download this file.)
      
    Report

  • Re: magnetic plug 912iS

    by » 10 years ago

    Thanks for steering me to the correct section of the illustrated parts manual. The question comes
    up because while doing the sport upgrade I removed the magnetic plug for inspection. Several days later when I was going to re-install the plug I noticed no sealing washer on the plug. So now I look at the illustrated parts and see no washer. So my question is does the plug install without
    a washer or is one not shown because it is considered part of the plug?
      
    Report

  • Re: magnetic plug 912iS

    by » 10 years ago

    No sealing washer is used on the mag plug. it has a self-sealing lip on the mating surface.
    Torque is only max 18 foot lbs or 25nm. Use a torque wrench, do not overtighten, no locktite.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
New spark plugs and operating hours cut in half General Tech Discussion 2
G3X not reading 912iS ECU 912iS Technical Questions 6
New 912iSc Crank Bias Negative Voltage 912iS Technical Questions 1
Oil line plug caps General Tech Discussion 5
912is rpm drop 912iS Technical Questions 32
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login