fbpx
Login

 

Jump to Forum..

912iS Breakin

in General Tech Discussion 9 years ago
looking for breakin instructions where are they located

DK 912iS

  • Re: 912iS Breakin

    by » 9 years ago

    there is no break-in process for the 912/914/912iS engines. the break-in is completed during at the factory and by the overhaul shop after overhaul.
      
    Report

  • Re: 912iS Breakin

    by » 9 years ago

    Hi David,

    As Rob said in different words :) go fly and have fun.

    DO NOT forget to make sure your engine is registered, make sure you do the required 25 hr. warranty inspection and oil change and MAKE SURE you put that in the logbook.

    Other than that time to go fly. :woohoo:

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
912is rpm drop 912iS Technical Questions 22
Topping off with XPS in 912iS General Tech Discussion 2
Coolest coolant for 912iS? 912iS Technical Questions 1
New 912iSc Crank Bias Negative Voltage 912iS Technical Questions 2
912is low fuel pressure (in-flight only) under 3500 RPM 912iS Technical Questions 7
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login