fbpx
Login

 

Jump to Forum..

Hour Meter Type

in General Tech Discussion 14 years ago
My plane doesn't have a hour meter and I want to put one on it, the choices are analog or digital, 12v powered and lithium battery powered. I transport it in a trailer, I would like to be able to work on it with 12v power on which would activate a 12v powered unit and a lithium battery vibration unit would be activated while transporting it. What's the wisdom of the forum on which way to go or what to do .

Ted

  • Re: Hour Meter Type

    by » 14 years ago

    I use a 12V analogue type which is only energised when the engine oil pressure goes above 1 Bar. It works well.
      
    Report

  • Re: Hour Meter Type

    by » 13 years ago

    Do you have a make on that type of meter, I've looked and haven't seen one with that function.
      
    Report

  • Re: Hour Meter Type

    by » 13 years ago

    I used one like this:

    http://stores.worldavionics.net/-strse-684/85012/Detail.bok

    and then built a small circuit to do the oil pressure detection (see attached PDFs).




    I have also attached a file that can be printed out and stuck to the top side of a piece of Vero strip board to show where to fit the components.




    There is also a diagram showing where to cut the tracks underneath.




    To adjust the trip point of the circuit you need to fit a variable resistor in place of your oil pressure sender and then adjust it so that your gauge reads 1 Bar. Then adjust the preset on the circuit so that the LED comes on. Don't forget to reconnect the oil pressure sender when you're finished! The Hobbs connects between +12V & the Hobbs -ve terminal of the circuit.

    I have been using this circuit successfully for a number of years. As a later mod I added a small piezo buzzer across D1, this then acts as a warning so that you don't accidentally leave your master on and drain your battery ;-) This latter function may not work if you use a low current digital type Hobbs.

    I have a vague recollection that I have seen a Hobbs with a built in oil pressure sense circuit. If I find it I will post details.
    Hobbsswitch-C.pdf (You do not have access to download this file.)
    HobbsswitchSilkScreen-B.pdf (You do not have access to download this file.)
    Hobbsswitchlayout-B.pdf (You do not have access to download this file.)
      
    Report

  • Re: Hour Meter Type

    by » 13 years ago

    I found this :
    http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1258455059-52-60&browse=ei&product=isspro-hour
      
    Report

  • Re: Hour Meter Type

    by » 13 years ago

    As Ted has indicated you can of course use a separate oil pressure switch to control any 12V powered Hobbs meter. I did consider this option but didn't fancy any additional plumbing in the oil circuit given that there was already a pressure transducer.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
What parameters can B.U.D.S. access? 915iS Technical Questions 2
Rotax 912 Annual & 100 Hour Enhanced Service Class Oct. 12th & 13th, 2024 Rotax-Owner Community 3
CHT probe type 912 / 914 Technical Questions 3
914 aluminum shavings in oil filter 600 hours 912 / 914 Technical Questions 13
Rotax 582 Kitfox SB#17 Type B Gearbox 2 Stroke Technical Questions 5
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login