Idle screw adjust

by rafa in 2 Stroke Technical Questions 6 years ago

Easy question? On a 582 even when I wind the idle screw right in, the engine only idles at about 1700 rpm.? Why the idle not goes to the recomended 2.000 rpm? The air screw setting is ok, (Rotax manual). Thanks a lot!!

Re: Idle screw adjust

by Dennis Richardson » 6 years ago

Dennis Richardson

1 153 169

Check the slide. It probably has a worn spot where the slide contacts the idle stop.

Thank you said by: rafa

Report
Re: Idle screw adjust

by rafa » 6 years ago

rafa

8 7 10

Excellent answer Dennis, the carb piston has a worn spot on the edge where the screw rests...thanks a lot

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Throttle calibration and idle RPMs	General Tech Discussion	1
Rough idle, 3200 RPM, flashing lane A	912iS Technical Questions	1
Idles too fast	912iS Technical Questions	2
Right side EGT normal then drops at idle	912 / 914 Technical Questions	7
Inflight adjustable prop questions	General Tech Discussion	3

Idle screw adjust

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login