Oil Temp Increases on 912UL

Hello Roger

I know this is an older thread but can you change the angle of Banjo fitting on the bottom of the engine to adjust the radius?

My engine is on its second main seal in 30 hours. We tested crank pressure and it was around 4  on the ground. One possiibilty is that when it gets hot and air coming through the cowl  blows on the hose it could be bending it at the banjo fitting enough to restrict flow?

It is an older engine with a fresh overhaul  several years ago and shelved for several years plus the top was made into a 130 HP fuel  EFI by Edge performance. Then fitted to a remos by the owner.

First the Prop seal went then the main and now the main again. We have been trying to plug leaks for a year now.

Fred

Yes. The Banjo bolt on the bottom can be clocked in any direction.