fbpx
Login

 

Jump to Forum..

912ULS High CHT. can't determine why

in 912 / 914 Technical Questions 9 years ago

  • Re: 912ULS High CHT. can't determine why

    by » 9 years ago

    Unless I'm mistaken doesnt the rotax operating manual indicate an allowable cht of 300 farenheit?
    you guys are way more sophisticated than I am but I was having a similiar overheating problem and it was an airflow
    cooling problem....not sufficent airflow over the cylinders. ...
      
    Report

  • Re: 912ULS High CHT. can't determine why

    by » 9 years ago

    Radiator I meant
      
    Report

  • Re: 912ULS High CHT. can't determine why

    by » 9 years ago

    Well, I still have no resolve with this and my local Rotax mechanic is baffled. I have flown 6 hours in the pattern and CHTs are still consistently around 255F. I landed and took cowl off and used an infrared thermometer to check each cylinder head temp and compare with the temp indicated on the Dynon. The temps were all around 245 and dynon displayed the same temp. The coolant expansion temp was around 233F. The only thing I know that is left to check is the impeller/water pump but from my reading they basically never fail. Oil temps are still running around 210-215, ambient temps have been in the 80s over last few weeks. if anyone has any other ideas that I am missed please let me know.
    IMG_0829.jpg (You do not have access to download this file.)
    IMG_0830.jpg (You do not have access to download this file.)
    IMG_0834.jpg (You do not have access to download this file.)
      
    Report

  • Re: 912ULS High CHT. can't determine why

    by » 9 years ago

    Dumb question, but are using evans waterless coolant?, I was using that in my rv-12 with 912uls and my CHT's were 235-240. I flushed and refilled with dex-cool coolant, and my temps dropped 30 degrees.

    Tom O.
      
    Report

  • Re: 912ULS High CHT. can't determine why

    by » 8 years ago

    Hello,
    Hope anyone can help...
    In the last 3 flights (1 hour each), during taxi and engine test (no more than 5 minutos From engine start) the right CHT on my 912 ULS with 150 hours rise to the maximum limit, then power for takeoff and goes normal.
    Thank you for any suggestion.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
No 912uls carbs in US?! Rotax-Owner Community 1
Ignition Problems 912ULS 912 / 914 Technical Questions 2
Rough running / high EGT 912iS Technical Questions 13
Rough running / high EGT 912iS Technical Questions 0
High EGT 912iS Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login