fbpx
Login

 

Jump to Forum..

5-year Rubber Replacement

in 912 / 914 Technical Questions 8 years ago
Has anyone replaced the oil and/or fuel lines with stainless steel braided Teflon (PTFE)? Teflon is impervious to gas, oil, ethanol, even 100% alcohol, and according to FAA-8083-30_Ch07, has unlimited shelf and service life. The question assumes the use of correct hose termination and fittings.

I have been reading through the numerous '5-year rubber' postings and will probably simply use Rotax parts for this year's 5-year replacement exercise. But I thought I would at least ask the question.

Thanks,
Dennis

  • Re: 5-year Rubber Replacement

    by » 8 years ago

    We just secured an LOA from Evektor to use FireSleeve on our Rotax 912ULS (Evektor SportStar S/LSA)
      
    Report

  • Re: 5-year Rubber Replacement

    by » 8 years ago

    Hi Dennis,

    There is a company that can be found on the Van's RV12 website. Just Teflon fuel lines would cost around $575 and oil lines maybe half to as much depending on your plane. I can replace a lot of fuel lines and oil lines for the next 15-20 years for that.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Dennis Urban
      
    Report

  • Re: 5-year Rubber Replacement

    by » 8 years ago

    I looked into them and found the price to be about the same the problem is teflon in braided stainless steel can take a lot of pressure but the suction line may collapse at high temperatures on the suction side I.E. maybe ending up with a loss of oil pressure.
    Thank you said by: Dennis Urban
      
    Report

  • Re: 5-year Rubber Replacement

    by » 8 years ago

    I don't know. You can replace fuel hose for $1.30 a ft. Teflon and or braided is more expensive.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 5-year Rubber Replacement

    by » 8 years ago

    Also,
    although the better hose may last 20 years, it does not change the fact that you have to replace every 5 years to be in compliance with Rotax Maintenance manuals. So unless it "came from the top" ie Rotax did it in the factory and reset the manuals I do not think the effort is worth it.

    Roger will know but I do not think there are premature failures (ie less than 5 years) if the install is done properly. I do know that fire covers on fuel lines are required under LSA ASTM.

    Glenn
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
912 air filters replacement 912 / 914 Technical Questions 1
5 YEAR RUBBER REPLACMENT 912iS Technical Questions 4
9-Series Ring Mount (Suspension Frame) Rubber Mounts General Tech Discussion 24
Replacement hose for coolant overflow bottle? 912iS Technical Questions 2
Replacement K&N air filter part number? 915iS Technical Questions 4
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login