fbpx
Login

 

Jump to Forum..

Mandatory fuel return line

in 912 / 914 Technical Questions 7 years ago
I just read a mandatory bulletin on the need to install a fuel return line on all 912 engines. This must be new because my plane has just had a fresh annual and this topic did not come up. Annual was 2 days ago.
I did not see a time frame for completion.
Thoughts please,
Rich

  • Re: Mandatory fuel return line

    by » 7 years ago

    I have an Evektor for ten years, and the fuel installation is exactly as in the bulletin ...
    Maybe the manufacturer of your device could inform you?
      
    Report

  • Re: Mandatory fuel return line

    by » 7 years ago

    I believe it is the AIRCRAFT Mfg that will ultimately determine if it is required to be fitted.
    My aircraft Mfg says it will remain an option.
    My personal thoughts are that as my aircraft is a "high wing" it is not needed.
      
    Report

  • Re: Mandatory fuel return line

    by » 7 years ago

    Rotax has wanted the recirculating line for many years it just changed the language in the manual. I know some that come to the shop with them since the late 1990's. Many engines in the earlier days were open air exposed and ran cooler, but now many are inside tight cowls which maintains more heat. The newer Corona pump is better off with it to.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Mandatory fuel return line

    by » 7 years ago

    Thanks for the replies. I contacted my mechanic and the return line is there. It's routed back to the inlet side of the gascolator from the spider manifold where the orifice is located.
    Rich
      
    Report

  • Re: Mandatory fuel return line

    by » 7 years ago

    ... the return line is ... routed back to the inlet side of the Gascolator ...


    That may be problematic.
    It needs to go to a location that is vented. Preferably the Fuel Tank.
    Returning Air/Vapors to the Gascolator allows it to accumulate and return back to the engine.
    It will eventually find its way to the carburetors and vented from the bowls
    but that defeats the purpose of a Vent Line returning the vapors to the fuel tanks to be vented.

    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Rotax fuel pressure sensor 664365 in Garmin G3X GDU460 915iS Technical Questions 0
Electrical Fuel Pumps General Tech Discussion 0
916 fuel pump alternatives 916iS Technical Questions 7
Oil line plug caps General Tech Discussion 5
914 Fuel Pressure/Prop Pitch 912 / 914 Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login