fbpx
Login

 

Jump to Forum..

Engine Fuel pump

in 912 / 914 Technical Questions 7 years ago

  • Re: Engine Fuel pump

    by » 7 years ago

    Hi Genival,

    David is correct where most mount the pump vent/drain tube. Back to the fire wall, make sure it isn't on or too close to an exhaust pipe and run it down to the bottom of the cowl, but not into the air stream. I see regular fuel hose used, clear polyvinyl used and the RV 12's use a combo of fuel hose into a piece of aluminum tube. It all works.
    I don't think there is a need to punch a hole through your cowl. Routing and installing a piece of polyvinyl takes about 3-5 minutes.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Engine speed: half sync 912iS Technical Questions 2
914 Fuel Smell in Cockpit 912 / 914 Technical Questions 9
Engine RPM 912 / 914 Technical Questions 9
916 Fuel Flow 916iS Technical Questions 8
Quality of Swtiches used for Engine Power General Tech Discussion 9
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login