Black minute particulate found in Carb' float Chamber 914

by EZEEMINHAS in 912 / 914 Technical Questions 6 years ago

Can anyone enlighten about black particle of micro size usually found in carb' float chambers of Rotax-914 F. Is it a fibrous material erroded from fuel lines or some other matter ?
If it is not from fuel lines, how come it passed through the fuel filter ?
Regards Ezee

Re: Black minute particulate found in Carb' float Chamber 914

by Garrett Wysocki » 6 years ago

Garrett Wysocki

1 572 1.45k

Maybe it is piece of material from the pump or hose. When is or was the 5 year rubber replacement done/due? I have flushed the lines thru a coffee filter to see if any other debris is present.

Report
Re: Black minute particulate found in Carb' float Chamber 914

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

Possibly a piece of hose or a flake of the external coating from a float. It has to come from after the fuel pump because it has a screen filter in it. If you have Teflon hose from the pump to the carbs then it is the carb float.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Black minute particulate found in Carb' float Chamber 914

by EZEEMINHAS » 6 years ago

EZEEMINHAS

2 2 0

After we found the partiicles, the engine was rough on start up but smooth on right carb' change. left carb' was found clean and okay. Is the rough running due to clogging by the black micro particulate ?

Report
Re: Black minute particulate found in Carb' float Chamber 914

by EZEEMINHAS » 6 years ago

EZEEMINHAS

2 2 0

Will check from technicians and let u know tomorrow
Thanks

Report
Re: Black minute particulate found in Carb' float Chamber 914

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

Using a set of carb sync “gauges” can help diagnose clogged carbs many times. If one carb seems to have an issue take it apart and blow out ALL orifices. The obstruction doesn’t have to be in the main jet to have some rough running.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: EZEEMINHAS

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
914 turbo overboost/crankshaft distortion symptoms?	912 / 914 Technical Questions	2
914UL Turbocharger	912 / 914 Technical Questions	2
914 Fuel Pressure/Prop Pitch	912 / 914 Technical Questions	2
ROTAX 914 fuel pumps	912 / 914 Technical Questions	1
Service Instruction: Installation of a propeller by usage of round-neck nut set for ROTAX® 912, 914, and 912 i (Series) Aircraft Engines	General Tech Discussion	9

Black minute particulate found in Carb' float Chamber 914

Recent Videos

Safety First!

Prize Giveaway!

Log In/Out

Login