Login

Soulas Philippe

1000hours check

by Soulas Philippe in 912 / 914 Technical Questions 6 years ago

Is there spécial cares to take at this occasion? Or is it a 600h process?
Thanks

Re: 1000hours check

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

If you didn't do the gearbox at 600 hrs. then do the gearbox and do a carb overhaul if it hasn't been done. Clean the oil tank if it hasn't been done in the last few hundred hours. Do the rubber change if it hasn't been done in r last 5 years.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: Soulas Philippe

Report
Re: 1000hours check

by Soulas Philippe » 6 years ago

Soulas Philippe

4 5 0

Good night Roger,

What do you mean by "rubber change"? All the silent blocks?

Report
Re: 1000hours check

by Roger Lee » 6 years ago

Roger Lee

128 5.28k 4.98k

Rotax Line maint. manual section 2 on Time limited parts. All rubber oil, fuel and coolant hoses, carb sockets, engine mounts, carb diaphragms, carb cross over tube rubber hoses, ect..... Look at the Line Maint. manual and that section to see all that is included in the 5 year preventive maint. time limited parts replacement.

Remember we can't pull over to the curb and preventive maint. even though we may not want to do it is usually a lot cheaper than fixing what goes wrong because we didn't do it.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Lane A and B check after start	912iS Technical Questions	5
Checking Turbo Filter Screen	915iS Technical Questions	2
Lane A and B check after start	912iS Technical Questions	8
915is > 250 RPM drop on lane check	915iS Technical Questions	1
Rough running 912s2 during mag check	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login