Login

Mag drop

by Bill Nelson in 912 / 914 Technical Questions 6 years ago

Page 2 of 3

Start
Prev
1
2
3
Next
End

Re: Mag drop

by Garrett Wysocki » 6 years ago

Garrett Wysocki

1 572 1.45k

I also took Roger Lee's advice in regards to plug gap and set at .023" the engine seemed to run better with the gap at minimum setting.

Thank you said by: Bill Nelson

Report
Re: Mag drop

by Bill Nelson » 6 years ago

Bill Nelson

6 10 0

Replaced spark plugs. Still doing the same thing. Will call Lockwood. Sounds like trouble woth on of the modules. Any other suggestions or thoughts?

Report
Re: Mag drop

by Kevin Machniak » 6 years ago

Kevin Machniak

6 167 40

Some have had dirty, corroded grounds from the modules to the engine causing some weird mag drops.

Thank you said by: Bill Nelson

Report
Re: Mag drop

by Bill Nelson » 6 years ago

Bill Nelson

6 10 0

Thanks. Not that old or that many hours. Connections are shiny and clean. Think the problem is a bad module.

Report
Re: Mag drop

by Matia F » 3 years ago

Matia F

0 3 48

Hi Bill,

I am having a similar problem with one side of my ignition.
How did you solve your problem? was it one of the modules?

Thanks

M

Report

Page 2 of 3

Start
Prev
1
2
3
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Fuel pump pressure drop	912iS Technical Questions	15
Mag Off, EGT High	912 / 914 Technical Questions	6
Stator/Mag Ring Puller	912 / 914 Technical Questions	6
Right side EGT normal then drops at idle	912 / 914 Technical Questions	7
Cylinder 1 EGT drop out	915iS Technical Questions	0

Top

© Rotax-Owner.com

Login