fbpx
Login

 

Jump to Forum..

High Oil Temp

in 912 / 914 Technical Questions 3 years ago

  • Re: High Oil Temp

    by » 3 years ago

    Thank you everyone who supported me to solve the issue . Proplem solved Bill ?. 

    It was the dam little resistor.  Now CHT and Oil temp almost reading the same . 

    I fapricated an Air funnel to oil cooler i will post the picture later. 

    Thanks again bill .

    30677_2_20210916_161315.jpg (You do not have access to download this file.)
    Thank you said by: RotaxOwner Admin
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Rough running at high rpm after 200hr service 912 / 914 Technical Questions 9
Rough running at high rpm after 200hr service 912 / 914 Technical Questions 1
Antifreeze trace in oil analysis 912 / 914 Technical Questions 6
Refilling coolant on a system with cap below high point General Tech Discussion 8
What temp does the exhaust pipe reach? General Tech Discussion 1
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login