fbpx

 

  • Re: 912iS fuel system

    by » 9 years ago


    Do you have some picture with the new installation or a .pdf of the Kitfox SI ?
    Thanks

  • Re: 912iS fuel system

    by » 9 years ago


    Aurensan, in response to your thread, I would be pleased to post a copy of the SI, however, when a person purchases a Kitfox build kit
    a statement must be signed to not reveal engineering data. But I expect John McBean (owner) would look favorably on an email from you concerning your interest. He often sells Kitfox items to owners of other makes of A/C. john@kitfoxaircraft.com. The assembled kit is
    about 14 inches long by 3.5 inches wide by three inches high.

  • Re: 912iS fuel system

    by » 9 years ago


    The Rotax fuel filter is not a Bosch. It is a made for Rotax filter. There have been some that have tried other filters with some serious results. There have been many with debris through out the system, high fuel pressure from debris clogging, collapsed interior medium of filters, fuel rail systems clogged. In this case saving a couple of bucks isn't worth it. The other issue is poor hose installation. Be very sanitary on hose installation and use a good brand hose. Lots of debris showing up from poor installations. Some trying to save a buck again.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


You do not have permissions to reply to this topic.